Flushing Unit 1200

Download product sheet Flushing Unit 1200


Flushing units are used to clean hydraulic piping. A new or rebuild hydraulic piping system should be flushed before it becomes operational. Our flushing system creates a high flow at high pressure. This leaves the inside walls of the fluid conductors at the same cleanliness as the new fluid that will be installed.

Modes of use

The system is designed for flushing hydraulic systems. Flushing speed should exceed 7 m/s. One unit is suitable for pipe diameters of up to 60 mm. Up to three flushing units can be coupled in order to achieve a higher capacity. The flow can be increased to 4,800 l/min. This allows for flushing pipe diameters up to 120 mm. Flushing units can also be used as temporary hydraulic power units.


Technical specifications


Flushing medium

mineral hydraulic oil

Flow (flushing)

1,200 l/min. @ 45 bar (maximum)

200 bar (maximum pressure)
fully adjustable

Flow (pressure testing)

11 l/min
500 bar (maximum pressure), fully adjustable

Electric motors

4 electric motors for flushing
30 kW – 400 V – 50 Hz – 60 A
1 electric motor for pressure testing
11 kW

Tank capacity

2,700 l

Filter in pressure line   

3 – 10 μ
4 filters to be installed in parallel

Filter in return line

3 – 10 μ
4 filters to be installed in parallel


4 x 38S in pressure line
4 x 38S in return line


10 ft container


5,500 kg (excluding flushing media)


Available services

  • filter supply
  • connection materials
  • onsite service engineer
  • flushing advice


Your partner in hydraulics!

IHC Hytop B.V.

T +31 (0)88 015 35 79

@ hytop@spam-preventionroyalihc.com